Garage door installation or replacement can cost you a lot of money. This is why it can be great trouble if your existing garage door is not working as well as it was and you are not able to point a finger at the cause of your garage door is stuck or creating loud sounds, then this troubleshooting checklist will help you.

  • Search around:

The first important thing you need to do is to search around to find out the exact causes. You would be surprised to know how many issues can be caused by the small parts of the garage door becoming clogged and damaged somewhere in the assembly.

  • Cleaning process:

Normally, a thick gooey substance spreads on the rollers and tracks of the garage door. This material is generated due to the exposure of dust and dirt. It can cause friction and the garage door may get stuck on its tracks. It also causes stuck movements of a garage door. You can use any mild household cleaning liquid to clean these substances. After washing the rollers, make sure to dry the rollers thoroughly.

  • Lubrication:

Sometimes, the garage door does not function because its moving parts are running dry. It is always suggested that lubrication should be done twice a month. Just avoid the plastic bearing. The use household oil and powdered graphite can be used on the tracks and rollers.

  • Check the garage door springs:

You should also check springs and cables. Extension springs can be found on both sides of the garage door and running from a pulley. You need to check the springs and cables are not rusty and damaged. Make a call to a professional garage door technician to determine if springs need to be replaced. Torsion springs are found at the top of the garage door which is complicated to replace so hire a professional garage door technician for this system.

  • Tighten the loose components:

Every part of the garage door is subject to general wear and tear. The screws, hinges, bolts, and nuts can become loose due to frequent movements of the garage door. You should inspect all the moving hardware involved in the operating mechanism of a garage door. Sometimes just tightening the hardware can solve the issues. You should adjust and replace them if required.

  • Check the tracks:

You should inspect the tracks to find out the dents and bumps. The metal tracks can guide the rollers and support the garage door to move smoothly. They should be kept cleaned and aligned so that the garage door can move smoothly. You should tap the affected areas to keep them in their original place.

Overall, garage doors are made from plastic, wood, metal, and fiberglass. So, it may take some effort to find out what is going wrong. If you are not a handyman, consult professional garage door experts for garage door repair.